315Ton Full Automatic Copper Sawdust Chips Powder Briquetting Press
This Y83-3150 scrap metal briquette press is mainly applied in the
aluminum alloy section plant, steel casting foundry, aluminum
casting factory, copper casting plant, etc. It compresses the waste
metal into briquette for melting again instead of the scrap steel,
pig iron, aluminum ingot and waste copper. This machine reduces the
melting loss of materials, significantly increasing the utilization
of waste metal.
The scrap metal briquette press can be operated manually or
automatically by PLC. Moreover, the optional feeding system can be
mounted to meet the needs of customers. Without heating or adding
any additives, this product is able to press various granular or
powder cast iron, aluminum, magnesium, titanium, molybdenum and
other metal materials into high density cylindrical briquettes,
which will not become loose before thrown into the furnace.
Under the situations that it is not heated or added with additives,
the scrap metal briquette press is capable of pressing diversified
granular and powdered materials into high density cylindrical
briquettes that are hard to become loose. It processes the waste
materials like scrap steel, cast iron, pig iron, aluminum ingot,
waste copper, magnesium, titanium and molybdenum for secondary
fusion instead of using them directly.
Our product makes it easy to recycle, smelt, store and transport
the scraps. Moreover, it reduces the cost and melting loss so that
the utilization rate of the waste is increased.
This product is commonly seen in the aluminum alloy section plant,
steel, aluminum and copper casting plants, etc.
|Cylinder pushing /shearing force||315 ton|
|Maximum working pressure||25MPa|
|Bale dimensions (LxWxH)||D125x(50-70)mm|
|Theoretical dry cicle time||12 sec.|
|Operation method||PLC Automatic Control|
|Machine dimensions (LxWxH)|
4. Structural Style
This scrap metal briquette press varies in vertical and horizontal
structure. Therein, the vertical product is equipped with or
without feeding cylinder. The diameter of bale can be designed in
the designated range according to users' need. If there is no
special requirement, the machine that weighs less than 200ton is
structured with welded frame. With the weight ranging from 200ton
to 315ton, the machine is designed with welded frame or four
columns. Yet the product weighing over 500ton uses four columns.
5. Operating Methods
Our scrap metal briquette press can be designed for manual
operation, single automatic operation or continuous automated
manipulation. Users are free to select the PLC system for
controlling the automatic operation as they want.
1) Due to the hydraulic drive, the machine runs stably and
2) The vertical product needs simplified foundation yet the
horizontal machine doesn't need.
3) Under the control of PLC, this scrap metal briquette press
possesses strong anti-interference capacity, high level of
automation and ease of operation.
4) Based on the demands of users, this product can be equipped with
automatic feeding and discharging devices to improve the production
efficiency and decrease the labor intensity.
Gloden supplier for world famous brand: