Guarding Safety cover Hydraulic Alligator Shear for scrap metal
Guarding hydrauic alligator shear:
This Q43-800 guarding hydrauic alligator shear is mainly applicable
for metal processing plant and scrap metal recycling station in
small scale. Equipped with the 800mm long cutting blade, it
performs with large shearing force. Driven by hydraulic device,
this machine offers secure performance and simple operation.
Moreover, it is available in mounting without foot screws. If there
is no power supply at the working site, this product can be powered
by the diesel engine, saving both time and labor.
The advantage of this alligator shear is that all the weld joints
are treated with fusion welding in the entire production process.
The configured bolts meet higher strength standards than other
similar products. This machine is able to shear about 3 to 5 tons
of materials per shift. According to the demands of customers, this
main frame and the hydraulic unit are integrated into all in one
machine. Therefore, this product is space saving and convenient for
transportation and operation. Moreover information about this
product can be obtained through contacting our sales group.
2. Technical Parameters:
|NO||Q43-800 Guarding hydrauic alligator shear -- Technical
|1||Largest shear force(ton)||800KN|
|2||Stroke of cut cylinder||240mm|
|3||Height of working table||790mm|
|4||frequency per minute(times)||8～12|
|6||Largest Blade Opening||340mm|
|7||Hydraulic system pressure||21MPa|
|11||Overall size of machine||2200×900×1600 mm|
Max. Scrap size can be cut:
|SN.||Scrap name||Scrap size||QTY.|
|1||Round bar||φ40 mm||1 PCS.|
|2||Square bar||35×35 mm||1 PCS.|
|3||Angle bar||40×40×4 mm||3 PCS.|
|4||Steel plate||14×125 mm||1 PCS.|
This Q43 series alligator shear is mostly applied in the metal
recycled processing plant, disassembling field of scraped vehicles,
smelting and casting fields and other industries. It is able to
process the steel section in different shape and diversified waste
structural metal like round steel, square steel, angle iron, I
steel, plate steel and steel pipe into the qualified furnace charge
through cold cutting. Added with appropriate devices, our product
can work as the length shearing equipment for small sized steel
section in rolling mill.
In the standard structure of the alligator shear, the mainframe and
the hydraulic station are separated. Therein, the main frame is
composed of cutting blade holder, blade moving bracket driven by
shearing cylinder, holding plate driven by holding cylinder,
adjusting device and so on. As for the small nonstandard machine,
the mainframe and the hydraulic can be integrated together as
customers require. Moreover, the clamping cylinder can be removed
depending on the cutting conditions.
Special design is in consistent with customers' needs. This machine
can apply manual feeding device, manual shearing system for single
cutting or automatic continuous cutting system. As to the small
sized machine, the foot pedal can be used for control.
1.Under the hydraulic drive, this alligator shear is safe, reliable
and convenient for manipulation.
2. The blade opening length varies, including 400mm, 600mm, 700mm,
800mm, 1000mm, 1200mm, 1600mm and 1800mm. The shearing force is
classified into eight grades, ranging from 63ton to 500ton. Users
can select the machine with different force and blade opening size
in certain range based on the working scale and shearing
3. It doesn't need the foot bolts to install the machine.
4. At the place where there is no power supply, the equipment can
be powered by the diesel engine.